Since the garboard was in place, I decided to go ahead and glue it up rather than take it down to install the daggerboard trunk. I took out all of the screws and made sure the board was in sink with the keel plank. I used weights and tools to even the two boards out. I mixed some epoxy and put it into a sandwich baggie with a little hole cut out of the corner. That worked pretty well I must say. I will have to go back and touch up the seam when I can remove all of the "weights".
Here are a couple pics.
I also took all the clamps off of the trunk. With a little touch up, it will be ready to install.
No comments:
Post a Comment