I laid down the fiberglass in the floor of the boat aft of the midship frame. This is to strengthen that part of the hull which I'm told "oil cans" in a seaway. Clint also suggested I do this. I laid it back to the rear bulkhead.
The edges are a little rough and will require some sanding.
Not quite sure How I'll finish the fiberglass sheet and strips. The floor will cover most of it. I could leave it like it is or fill it with some thickened epoxy. I'll think on it.
Now to fit out the interior. I'll start with the bulkheads I believe. I played with the forward one a bit this evening. The fit appeared to be a bit tricky. We'll see how it goes.
No comments:
Post a Comment